Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

factory reset after power off

I use Cisco switch sg300-28. When i turn it off and turn on, it reset to factory reset include login password, dose it normal operation or I miss anything?

Thank you.

Sent from Cisco Technical Support iPad App

1 ACCEPTED SOLUTION

Accepted Solutions
Green

factory reset after power off

Hello Jerry, the SX300 series switches have a running configuration and a start up configuration. For the switch to retain settings, you must save the running config to the startup otherwise all settings will be lost.

After making a change there is a blinking save icon on the top right. You may click this and follow the windows. In addition, you can go to Admin -> File Managemenet -> Copy File and save there as well.

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
2 REPLIES
Green

factory reset after power off

Hello Jerry, the SX300 series switches have a running configuration and a start up configuration. For the switch to retain settings, you must save the running config to the startup otherwise all settings will be lost.

After making a change there is a blinking save icon on the top right. You may click this and follow the windows. In addition, you can go to Admin -> File Managemenet -> Copy File and save there as well.

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
New Member

Re: factory reset after power off

Thank you

Sent from Cisco Technical Support iPad App

882
Views
0
Helpful
2
Replies