Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how step by step enable ssh service in switch small bussines?

HI,

I upgraded Firmware on switch smallbussines 200, but I don't know how enable SSH.

Could somebody step by step how will do that?

9 REPLIES
New Member

Hi, how did you connect

Hi,

 

how did you connect before the firmware update?

 

http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbss/sf200e/administration_guide/OL-22849.pdf

As the document discribes use the ssh management key page to generate the key.

If there is a key already, delete it and generate a new one.

 

regards

New Member

Hi,I conected by web browser

Hi,

I conected by web browser.

I think I have difrent switch...

I uploaded screenshot

Could you describe how do SSH?

 

regards

New Member

Hi, with SSH you can't

Hi,

 

with SSH you can't connect by web browser, you can only connect to the cli.

If you want more security with your web browser enable https as shown in my first screen.

 

In your SSH configuration you set up an SSH user and password, is that the correct method you try to connect?

the more easiest way to connect is with an rsa public key, so server and client exchange the keys by themselves.

To do so, look at my second screen. Sry but i have only an sf302-08 for showing purposes, so i used your screen and marked the steps.

1. Delete the RSA und DSA key by marking them and klick on delete

2. Mark as user authentication "by RSA public key" and klick on apply

3. check the TCP/UDP services, SSH must be enabled manually (screen1)

4. reboot the switch

 

Now try to connect to the switch by putty or another ssh capable switch.

 

regards

New Member

I don't have SSH ServiceLook

I don't have SSH Service

Look screen please...

Is correct?

Silver

Hello,The 200 series switches

Hello,

The 200 series switches do not support CLI configuration.  If you want CLI, either through console, SSH, or telnet you would need an 300 series or higher.  For the 200 series your only option to configure the device is to use the web GUI.

There are some new switches coming out, the 220s that do support some CLI access, but your switch does not.

Hope that helps and thank you for choosing Cisco,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

*please rate helpful posts*

New Member

HiThank you for full answer :

Hi

Thank you for full answer :)

Best Regards

New Member

Ok, I have switch 300Could

Ok, I have switch 300

Could you please explain me how enable SSH, step by step or send me manual?

I added screen.

Best Regards

 

Silver

Hello,To enable SSH in the

Hello,

To enable SSH in the CLI simply type in ip ssh server.

To enable it through the web GUI, go to Security >> TCP/UDP Services and check the box for SSH.

Then simply connect to the switch's management IP using your preferred SSH client.

Hope that helps,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

*please rate helpful posts*

New Member

Yes, yes, yes, it works :

Yes, yes, yes, it works :)

Thank you. I don't know why I thought about SSH User Authentication etc., sorry

 

Best Regards

177
Views
20
Helpful
9
Replies