03-11-2014 07:31 AM
I am attemptting to configure a SF500-48p switch to do the following
Use port 1 as VLAN 100, use port 2 as Vlan 200 both of these are untagged Vlans, then use port 3 as a trunk for both the vlans which would be tagged.
I am attempting to use both the GUI and the CLI and I am not able to make this work.
Any help woould be great
03-11-2014 09:17 AM
Hello David,
The following link may help you with this configuration:
http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=d863955fd1454c5cb94a468742771c78_VLAN_Creation_on_the_Sx500_Series_Managed_Switches.xml&pid=2&respid=0&snid=4&dispid=0&cpage=search
http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=06edc9e9b95745e291d6a13accd69ca4_VLAN_Interface_Settings_Configuration_on_Sx500_Series_Stacka.xml&pid=2&respid=0&snid=4&dispid=0&cpage=search
Nagaraja
03-12-2014 11:03 AM
Hi David, there seems to be omissions in what is the actual desired result.
It is apparent you want some sort of host connection on VLAN 100 and VLAN 200. It's also apparent you want port 3 to service as a trunk. But the question remains, what does that trunk connect to? To make this work depends on what connects to that trunk connects to and how it handles VLAN in different scenarios.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide