Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to create a static ARP using SNMP ?

Hi

I want to create a static ARP using SNMP.

I can delete a ARP by setting oid '1.3.6.1.2.1.4.22.1.4' to '2' .

But neither of

      '1.3.6.1.2.1.4.22.1.1'  

      '1.3.6.1.2.1.4.22.1.2'  

      '1.3.6.1.2.1.4.22.1.3'  

      '1.3.6.1.2.1.4.22.1.4'  

      can be modified or created

snmp-server community is RW

I can modify other oid, for example 'sysName' oid 1.3.6.1.2.1.1.5.0

I used this command to create a new ARP :

     snmp set v2 192.168.10.1 private oid 1.3.6.1.2.1.4.22.1.1 integer 1

the response:

     SNMP Response: reqid 16, errstat 11, erridx 1

      ipNetToMediaEntry.1 = 1

errstat 11 is NOCREATION

And I used the tool 'Mib Browser' to set a static a ARP,

the response is NOCREATION too.

I searched a lot of time, many people have this problem,

someone said the oid ipNetToPhysicalPhysAddress or inetCidrRouteTable is alternative,

but our switch haven't these oids.

I can't find a solution.

I want to know whether the task can be completed.

please help.

Regards

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

How to create a static ARP using SNMP ?

Dear Fu,

Thank you for reaching the Small Business Support Community.

I am not positive this can be accomplished on the Small Business Switches, however, what is your switch model and firmware version so I can investigate further.

I'll be looking forward to your reply.

Kind regards,

Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer

*Please rate the Post so other will know when an answer has been found.

Jeffrey Rodriguez S. .:|:.:|:. Cisco Customer Support Engineer *Please rate the Post so other will know when an answer has been found.
2 REPLIES
Bronze

How to create a static ARP using SNMP ?

Dear Fu,

Thank you for reaching the Small Business Support Community.

I am not positive this can be accomplished on the Small Business Switches, however, what is your switch model and firmware version so I can investigate further.

I'll be looking forward to your reply.

Kind regards,

Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer

*Please rate the Post so other will know when an answer has been found.

Jeffrey Rodriguez S. .:|:.:|:. Cisco Customer Support Engineer *Please rate the Post so other will know when an answer has been found.
New Member

How to create a static ARP using SNMP ?

Dear Jeffrey,

Thank you for your answer.

We talked with cisco support team.

Finally, their said that it is a bug and can't be resloved now.

anyway, thank you.

Regrads

734
Views
0
Helpful
2
Replies