I am installing this switch to a new departement. The reason of this is to share networks and bring POE over there as we will be istalling VOIP phones next month. We already have a network in place: -Cisco me 3400 from the ISP -Cisco ASA 5510 firewall -Cisco ESW 520 (x3) where access points are connected as well as most part of the network -Cisco catalyst 3900 (x3) for extra ports
I am actually adding these 2 devices: -SF302-08P -WES610N
The SF302-08P will be used for network and VOIP, while the WES610n connects 2 industrial printers to the network. The network uses VLANS (10 WAN for office, 100 VOIP, 300 WIFI and 309 for management)
Here are my troubles: The SF302-08P refuse VOIP registration but allows computers The WES610n connects to access point, allows devices to fetch info from DHCP but blocks every connection except tracert
Any advices or help on this would be greatly appreciated
This forum deals primarily with the Cisco Enterprise switches and as such that is the expertise people have here. You have a Small Business switch. No offense intended but you should move this to the Small Business switches forum where you should get the help you need -
Article ID:4006 Configure Secure Shell (SSH) Server Authentication
Settings on a Switch Objective Secure Shell (SSH) is a protocol that
provides a secure remote connection to specific network devices. This
connection provides functionality that is similar...
Article ID:4982 Access an SMB Switch CLI using SSH or Telnet Objective
The Cisco Small Business Managed Switches can be remotely accessed and
configured through the Command Line Interface (CLI). Accessing the CLI
allows commands to be entered in a termina...
Article ID:5735 Convert Configuration Files using the Configuration
Migration Tool on Cisco Small Business Switches Introduction The Cisco
Configuration Migration Tool allows you to convert configuration files
from previous generation of Cisco Small Busin...