Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Jumbo frames on SGE2000

Hi all,

I'm just looking in to turning jumbo frames on, on our SGE2000 but i'm only going to be using it on a single VLAN and it appears to be a global setting.

Will this be an issue?

Thanks,

Ian

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Jumbo frames on SGE2000

Enabling Jumbo frames on your switch should not be of issue, just keep in mind that it is enabled Globally as you state so you can't inhibit it to only a single VLAN, however it should not create any problems on any other VLANs if that's what you're asking.

Best Regards,

Glenn

2 REPLIES
Cisco Employee

Re: Jumbo frames on SGE2000

Enabling Jumbo frames on your switch should not be of issue, just keep in mind that it is enabled Globally as you state so you can't inhibit it to only a single VLAN, however it should not create any problems on any other VLANs if that's what you're asking.

Best Regards,

Glenn

New Member

Re: Jumbo frames on SGE2000

Hi Glenn,

Thanks for your reply. I suppose my main worry is that enabling jumbo frames is going to have an affect on the other vlans which are not using it.

Thanks again,

Ian

1306
Views
0
Helpful
2
Replies