My question is how do I need to do in order to upload IOS image to switch? The switch has no function without IOS. So there is no Webview as suppose be on the switch for access to setup, management, upgarde, etc.
Hi Sosathea, first, purchasing any Cisco product from a vendor such as ebay voids the warranty of the unit. I would recommend to return it to the buyer.
Second, the switch does not run an IOS. It does have a software image and the device is ran over GUI. You may try to load the firmware off the cisco website through xmodem using hyper terminal. But at this point, it looks like the flash is corrupt and the person who sold that switch to you provided a damaged product.
-Tom Please rate helpful posts
Please mark answered for helpful posts
I do understand what you said but I just wanted to know how to do on xmodem to download software image because there is no setup how the xmodem get the file. I do have software image on my harddrive. I am run win 7 Pro which connect to console of the switch. I am also attach the screen shot of xmodem behave.
Article ID:4006 Configure Secure Shell (SSH) Server Authentication
Settings on a Switch Objective Secure Shell (SSH) is a protocol that
provides a secure remote connection to specific network devices. This
connection provides functionality that is similar...
Article ID:4982 Access an SMB Switch CLI using SSH or Telnet Objective
The Cisco Small Business Managed Switches can be remotely accessed and
configured through the Command Line Interface (CLI). Accessing the CLI
allows commands to be entered in a termina...
Article ID:5735 Convert Configuration Files using the Configuration
Migration Tool on Cisco Small Business Switches Introduction The Cisco
Configuration Migration Tool allows you to convert configuration files
from previous generation of Cisco Small Busin...