08-07-2013 03:23 PM
I am going to purchase two Cisco SG200-26P switches with a MGBSX1 transceiver for each and connect them together via fiber. Am I correct to assume that the fiber port is configurable for VLANs? So if I configure four VLANS (1-4 on both switches, port 1 on VLAN1, port 2 on VLAN2, etc.), I can configure the fiber port to be on all four VLANS so that traffic for all four VLANS will move between the two switches?
Solved! Go to Solution.
08-07-2013 03:31 PM
Hi David, you are correct.
-Tom
Please mark answered for helpful posts
08-07-2013 03:31 PM
Hi David, you are correct.
-Tom
Please mark answered for helpful posts
08-08-2013 05:31 AM
Thanks very much; for the answer and for the quick reply!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide