Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Moving VLAN config from catalyst 2960 to SG300

Dear all,

my existing catalyst 2960 config for vlans:

...

interface FastEthernet0/2
 description 3Com Switch
 switchport access vlan 10
 switchport mode access

...

interface FastEthernet0/5
 description to Cyberoam
 switchport mode trunk

...

interface FastEthernet0/18
 switchport access vlan 40
 switchport mode access
!
interface FastEthernet0/19
!
interface FastEthernet0/20
 switchport access vlan 20
 switchport mode access
!
interface FastEthernet0/21
!
interface FastEthernet0/22

...

!
interface Vlan1
 no ip address
 no ip route-cache
!
interface Vlan10
 ip address 192.168.0.51 255.255.255.0
 no ip route-cache

...

Inside trunk there are VLAN10 (native), VLAN20,30,40

now, when I try to configure the same on SG300 I get trunk issues - no VLAN10 (native) inside trunk.

 

Regards

GN

126
Views
0
Helpful
0
Replies
CreatePlease login to create content