10-02-2014 11:33 PM
Hi to all i have a little problem with RV016.I have one site to site vlan ipsec and i would like to add a remote vlan to the tunneling but RV has only three options
-IP
-Subnet
-IP Range
Now the remote lan for vpn is 192.168.10.0/24 and i would like to add 10.1.1.0/24
Can someone help me ?
Solved! Go to Solution.
10-03-2014 04:43 AM
Glad to hear that
Please rate the useful post and mark as answered to help other Cisco Customers
Cheers
Mehdi
10-03-2014 04:01 AM
Hi Ckioroglou,
I'm need more information regarding the VPN on both site but from I understand I can suggest the following
we can have three solution
- Create a second Tunnel and use the local remote as Subnet and configure the Vlan Subnet (10.1.1.0/24)
Or
- If it's possible to change th Vlan to 192.168.x.x and we can have only one Tunnel with remote subnet class B (/16)
Or
- We can use only one IPsec VPN tunnel where the Remote Local is setup to 0.0.0.0 and mask 0.0.0.0 and other site the local network 0.0.0.0 and mask 0.0.0.0 BUT
In this situation we will have full tunnel IPsec Site to Site it mean's all the traffic include Internet traffic will pass through the VPN
Please rate the post or mark as answered to help other Cisco Customer
Best regards
Mehdi
10-03-2014 04:09 AM
i fix it
i made a new vpn tunel with new vlan remote address and now working!!!!
10-03-2014 04:43 AM
Glad to hear that
Please rate the useful post and mark as answered to help other Cisco Customers
Cheers
Mehdi
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: