Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

RV016 VPN Gateway to Gateway problem to add remote vlan

Hi to all i have a little problem with RV016.I have one site to site vlan ipsec and i would like to add a remote vlan to the tunneling but RV has only three options

-IP

-Subnet

-IP Range

 

Now the remote lan for vpn is 192.168.10.0/24 and i would like to add 10.1.1.0/24

Can someone help me ?

1 ACCEPTED SOLUTION

Accepted Solutions

Glad to hear that  Please

Glad to hear that 

 

Please rate the useful post and mark as answered to help other Cisco Customers

 

Cheers

Mehdi

3 REPLIES

Hi Ckioroglou,I'm need more

Hi Ckioroglou,

I'm need more information  regarding the VPN on both site but from I understand I can suggest the following 

we can have three solution 

- Create a second Tunnel and use the local remote as Subnet and configure the Vlan Subnet (10.1.1.0/24) 

Or 

- If it's possible to change th Vlan to 192.168.x.x and we can have only one Tunnel with remote subnet class B (/16) 

Or

- We can use only one IPsec VPN tunnel where the Remote Local is setup to 0.0.0.0 and mask 0.0.0.0 and other site the local network 0.0.0.0 and mask 0.0.0.0 BUT 

 In this situation we will have full tunnel IPsec Site to Site it mean's all the traffic include Internet traffic will pass through the VPN

 

Please rate the post or mark as answered to help other Cisco Customer

 

Best regards

Mehdi

 

New Member

i fix iti made a new vpn

i fix it

i made a new vpn tunel with new vlan remote address and now working!!!!
 

Glad to hear that  Please

Glad to hear that 

 

Please rate the useful post and mark as answered to help other Cisco Customers

 

Cheers

Mehdi

58
Views
0
Helpful
3
Replies
CreatePlease to create content