Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

setting up a vlan

I am trying to set up a vlan between buildings I have a srw2024 and a srw2016 switch with fiber between the buildings

the fibers are on ports 24 (srw2024) and 16 (srw2016) I want to be on vlan 1 and 20.

ports 17 (srw2024) and port 7 (srw2016) I want to be on vlan 20 only

I have tried to do this but I can only get ports 24 and 16 to be on one vlan only

am I missing something to get them both on vlan 20 and 1

thanks for your help

1 REPLY
Cisco Employee

Re: setting up a vlan

Hi Mike,

ports 24 and 16 change port mode from access to trunk.

go to VLAN management > create vlan (add VLAN 20)

then VLAN management > Port settings > (select port 24 on 2024 and 16 on 2016) change access mode to trunk

Then go to VLAN management > Port to VLAN > (select VLAN 20 form drop down field)

srw2024 radio buttons port 17 select untagged port 24 tagged

srw2016 radio buttons port 7 select untagged port 16 tagged

thanks

Razmik Mampourian

2273
Views
0
Helpful
1
Replies
CreatePlease login to create content