Hello, I use WS-CE500-24LC Small Business Switch (IOS VER: 12.2(25)SEG6) and I need to use it with Gigabit SX Mini-GBIC Transciever (LC SFP) optical module. I tried Cisco MGBSX1 module, but the switch detects this module as non-compliant SPF module and switches the port to the off-line. I also tried some non-Cisco SFP modules, but with the same result. The only module that works is (as GLC-SX-MM copatible) Finisar SFP module marked FTRJ8519BNL (850nm SX MM), but it is end-of-life product. Does exist any Cisco SFP module that works in the WS-CE500-24LC switch?
The CE500 line of switches have been announced End of Sale/End of Life. Because of this you are finding that compatible GBICs are also EoS/EoL. The last hardware ship date for this product line was March of this year. You can find suggested replacement product information on the EoS/EoL announcement located here.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...