Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SG 200-08p Wont upgrade firmware

I have a fleet of the SG-200-08P switches which are way behind on firmware. I went to upgrade them to the newest firmware available:

     "sx200_fw_1.3.7.18.ros"

After about a 5-7 minute wait, the web interface returned the message (tired multiple times):

     "Firmware Image download through HTTP failed. Wrong File Type."

I reset the router, same results. I went and installed the second most recent verson, "SG200-08x_FW_1.0.7.4.stk", which installed without any issues. Then tried the "sx200_fw_1.3.7.18.ros" file and again with the same result:

     "Firmware Image download through HTTP failed. Wrong File Type."

I then did a factory reset and tried again, same results. It seems that none of my routers want to use the .ros files, it preferes the .stk files. What am I doing wrong?

I'm accessing the upgrade feature via "Main Menu -> Administration -> Upgrade/Backup firmware" and have it set to:

  X - via Http

  X - Upgrade

  X - Firmware image

Please HELP!!!

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Gold

SG 200-08p Wont upgrade firmware

Marc,

SG200-08x_FW_1.0.7.4.stk is the latest firmware for the SG200-08x.

sx200_fw_1.3.7.18.ros was posted on the download page by mistake. We are working on getting it removed.

- Marty

3 REPLIES
Gold

SG 200-08p Wont upgrade firmware

Marc,

SG200-08x_FW_1.0.7.4.stk is the latest firmware for the SG200-08x.

sx200_fw_1.3.7.18.ros was posted on the download page by mistake. We are working on getting it removed.

- Marty

New Member

SG 200-08p Wont upgrade firmware

Thanks for the info. I was working off another post where someone laid claim to installing the 1.3.x firmware on their sg200 to enable SNMP protocols for Spiceworks Management software.

Does this mean there is no SNMP options for the SG200-08P switches?

Gold

SG 200-08p Wont upgrade firmware

Marc,

The person who made the claim may have had a larger SG200. The SG200-08x has a custom firmware due to hardware limitations. There are no SNMP options at this time.

- Marty

780
Views
0
Helpful
3
Replies
CreatePlease login to create content