SG 200-26 Switch - Canon ImageRunners Can't Scan to IP Address
I installed an SG 200-26 switch this weekend, and now I have a problem scanning from our Canon Imagerunner printer/scanners to any IP address on our network. It's not a DNS issue as the address book entries contain the destination computer IP address. This is a big problem for our business, so any help will be greatly appreciated.
Re: SG 200-26 Switch - Canon ImageRunners Can't Scan to IP Addre
First I would make sure the SG200 switch is running latest firmware. After the upgrade you want to factory reset unit, so do this first before making any configuration changes. Next start configuring the switch as needed.If you need further support give us a call @ 1-866-606-1866 and open a support case.
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...