Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SG200-26P and LACP

Hi,

I have two NAS. Each one from a different manufacturer, QNAP and Synology.

The two NAS support LACP IEEE802.3ad but in this way QNAP loses 40% of the packets and Synology not work.

With a Cisco Calatyst 3750 both NAS I work well. Do I have to do something in the SG200 to work?

Thank you.

Everyone's tags (3)
2 REPLIES
Green

SG200-26P and LACP

Hi Felipe, you may want to check the load balance method the NAS uses. The Sx200 has a limited feature set compared to a 3750 in this regard.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
New Member

SG200-26P and LACP

Hi Tom,

I use the mode   IEEE 802.3ad Dynamic Link Aggregation on the Synolgy and QNAP.

Maybe I should use another way?

Thank´s

573
Views
0
Helpful
2
Replies