Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SG300-52P How to setup Two Vlans voice and data and have cisco 7945G pull proper Vlan

These switches go over a VPN back to main campus for Cisco unity support.

Phones do not pull proper VLan.  Cisco support tells me I need to configure the phones to know vlan.  Switch cdp or lldp should be doing this

 

Everyone's tags (1)
4 REPLIES

Can you post a sample

Can you post a sample configuration of one switch port?

show run interface ....

along with

show interface .... switchport

New Member

Show

Show

New Member

PearlSG300-52P2#show

PearlSG300-52P2#show interface switchport ge 6
Port : gi6
Port Mode: Trunk
Gvrp Status: disabled
Ingress Filtering: true
Acceptable Frame Type: admitAll
Ingress UnTagged VLAN ( NATIVE ): 1

Port is member in:

Vlan               Name               Egress rule Port Membership Type
---- -------------------------------- ----------- --------------------
 1                  1                  Untagged          Static
 5                  5                   Tagged           Static


Forbidden VLANS:
Vlan               Name
---- --------------------------------

New Member

also how does it know how to

also how does it know how to router to that vlan 5 interface , seems to me the switch has to have a ip bound somewhere , ?

163
Views
0
Helpful
4
Replies