Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SG300 Bootloader update failing

Hi 

i just got a SG300-10, and i tried updating the firmware and the bootloader.

now im stuck with this:
SW version    1.3.7.18 ( date  12-Jan-2014 time  18:02:59 )
Boot version    1.1.0.6 ( date  11-May-2011 time  18:31:00 )
HW version    V02

i tried to update it via the webinterface and CLI booth without any changes.

these are the ressources i used while upgrading:
https://supportforums.cisco.com/discussion/11953536/sg300-bootloader-upgrade
http://columbiabrian.blogspot.ch/2014/04/how-to-upgrade-firmware-on-cisco-small.html


any input is welcome :)

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Hello,There is currently a

Hello,

There is currently a problem with the bootcode files available on the website.  I just went and tried to download the bootcode and it tried to tell me it was some 30 MB file.  The appropriate people have been notified, and the problem should be corrected soon.

In the meantime I have attached the correct bootcode to my post, feel free to use that.

Hope that helps, and sorry for the inconvenience,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

*please rate helpful posts*

4 REPLIES
Silver

Hello,There is currently a

Hello,

There is currently a problem with the bootcode files available on the website.  I just went and tried to download the bootcode and it tried to tell me it was some 30 MB file.  The appropriate people have been notified, and the problem should be corrected soon.

In the meantime I have attached the correct bootcode to my post, feel free to use that.

Hope that helps, and sorry for the inconvenience,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

*please rate helpful posts*

New Member

Hi Chrebert,Thanks for the

Hi Chrebert,

Thanks for the reply, i did the same procedure with the file you uploaded.
and now it works!

strangely enough i had the same file size.

anyway its working now.

 

cheers

New Member

Hi Chrebert, I was struggling

Hi Chrebert,

 

I was struggling to update the boot code on my SG300-10 until I came across your post.

 

Your attached boot code worked for me

 

Thanks

New Member

What am I doing wrong?  The

What am I doing wrong?  The file loads in to the switch, then I reboot.  Nothing.  Same boot loader version.

Help anybody.

361
Views
5
Helpful
4
Replies