Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SG300 Broken SNMPv2 64-bit Packet Counters

The following OIDs trees are not being updated and always return 0:

1.3.6.1.2.1.31.1.1.1.7 (ifHCInUcastPkts)

1.3.6.1.2.1.31.1.1.1.8 (ifHCInMulticastPkts)

1.3.6.1.2.1.31.1.1.1.9 (ifHCInBroadcastPkts)

1.3.6.1.2.1.31.1.1.1.11 (ifHCOutUcastPkts)

1.3.6.1.2.1.31.1.1.1.12 (ifHCOutMulticastPkts)

1.3.6.1.2.1.31.1.1.1.13 (ifHCOutBroadcastPkts)

This was tested using the latest firmware (1.2.5.70).

1 REPLY
Green

Re: SG300 Broken SNMPv2 64-bit Packet Counters

Hello cisco.mark.

I have set up a multicast lab using a program called Ostinato. Essentially, I flooded the switch with multicast packets. Current on the lab I have received 550 frames and sent 231.

The mentioned OIDs are indeed not returning results.

My lab consists of;

Window Vista 64 bit laptop

SG300-20 (1.2.5.70)

Ostinato (to generate packets)

SNMPc (mib browser) SNMP V2c

If you can send me a PM with your cisco user ID and serial number, I can open up a case for you and see if we can come up with a resolution.

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
721
Views
0
Helpful
1
Replies