Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SG300 Login Radius authentification

Hallo Community,

i have a big problem with my SG300 switch. I would like to implement Radius authentification for SSH Access via Radius.

The Radius server is a Windows Server 2008 R2 (NPS). The Switch and the Server can communicate.

On the radius server are the following settings confugured:

Service type 6

Cisco AV Pair shell:priv-lvl=15

I open a connection via putty for SSH access:

i use my domain login, right username and the right password. But i get the message: Authentification Failed

The radius server get the information that the access grant.

sshlogin.jpg

If i try a false password or a unkown user, i get a new change to use another user or password.

sshlogin2.jpg

here are the Radius setting:

radius.jpg

Can anybody help me?

Everyone's tags (4)
3 REPLIES
Green

SG300 Login Radius authentification

Hi Markus, did you define the log in hierarchy to be RADIUS over log in on the switch? If you did not, local log in will take precedent over RADIUS until local log in is unable to operate then RADIUS would become active.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
New Member

Hello, I'm having this same

Hello, I'm having this same problem, did you ever find a solution?

New Member

I also had this problem, my

I also had this problem, my solution was to set Service Type to: Adminstrative on my Windows NPS Radius servers., and of course, still the Vendor specific attribute of: Cisco AV Pair shell:priv-lvl=15

512
Views
0
Helpful
3
Replies
CreatePlease login to create content