I have to connect SG500x to 2960x through 10G SFP port by using fiber module SFP-10G-SR . both switches 10g SFP interface trunk mode same native vlan , but interface not coming to up on both side. but same fiber modules I succefully tested with two 2960x each other. Please help me to resolve this issue.
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...