Everything branded Linksys will be branded Linksys by Cisco. That will be the new label from here on out for the LINKSYS small business equipment.
The Small Business PRO equipment will not include a Linksys logo since it is not really part of the linksys product line. The Small Business PRO line is meant to bridge the gap between Linksys Small Business and Cisco Enterprise.
What you are referring to is the look and feel of the firmware. I was commenting on the physical characteristics of the devices. It is my assumption that all firmware will be updated to reflect the new look and feel that you have described; I don't know when. You are correct that all formerly Linksys products will be branded Cisco or Linksys by Cisco.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...