Cisco Support Community
Community Member

SLM2048 Scripting Possibilities ?

Hi everyone,

i do have 3 SLM2048 Switches installed and configured as a single Stack.

The switches are running fine. My problem is, that the Web interface is quite slow and also in some cases not that flexible ( if i want to configure VLANs i have to do this for each port seperately, what takes me too much time).

Because we have a test lab, i need to switch the VLANs almost every week.

Is there a way to configure multiple ports for VLAN with almost one click ?

Or is there an advanced CLI interface to script VLAN configurations ?

Thanks in advance.



Re: SLM2048 Scripting Possibilities ?

Unfortunately there is no scripting or Command Line for any of our small business switches at the moment.  I apologize for the inconvenience but this switch don't have an option for quick deployment of configurations like your wanting.

Re: SLM2048 Scripting Possibilities ?

Hi Reineke_fox

Maybe next time you might  consider the  SRW2048-k9-NA  (NA standing for North America) as a Small business purchas ,  this is  the very new replacement for the old SRW2048.  The SRW series traditionally was one step above the SLM series in features and functions. Now with the SRW series refresh that recent occured it really seems to be generations ahead of SLM and the older SRW series.

Maybe next time.

It's a newer technology switch slight more expensive  but a nice fully managed switch, but comes with great warranty and forward  NBD replacement where applicable..

Very young in it's life cycle  and has the option to modify an text based configuraion file for faster delpyment.  You may note from the script below a few features;

1. IPv6 for NG network support

2. Support for OUI identification of IP phones for some Auto QOS options.

3. Bonjour and Cisco  Findit support

4. Green features with some power saving options.

here's an example of a script just taken from my SRW2008P-K9-NA, having this script would definetly speed up deployment.

regards Dave

interface vlan 100

name uc520-voice


voice vlan oui-table add 0001e3 Siemens_AG_phone________

voice vlan oui-table add 00036b Cisco_phone_____________

voice vlan oui-table add 00096e Avaya___________________

voice vlan oui-table add 000fe2 H3C_Aolynk______________

voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone

voice vlan oui-table add 00d01e Pingtel_phone___________

voice vlan oui-table add 00e075 Polycom/Veritel_phone___

voice vlan oui-table add 00e0bb 3Com_phone______________

interface ethernet g8

port monitor vlan 1

interface vlan 1

ip igmp snooping mrouter ports add ethernet g10


interface vlan 100

ip igmp snooping mrouter ports add ethernet g10


green-ethernet short-reach

interface vlan 1

ipv6 enable no-autoconfig

no ipv6 unreachables

ipv6 address 2001:1:1:1::300/64


interface vlan 1

ip address


ip default-gateway

interface vlan 1

no ip address dhcp


bonjour service enable csco-sb

bonjour service enable http  

bonjour service enable https 

bonjour service enable ssh   

bonjour service enable telnet

hostname switch38cbaf

username dave password e69867cda7d7b60a2a61236e7b791c106f7bf64 level 15 encrypted

no snmp-server enable

CreatePlease to create content