cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
995
Views
0
Helpful
3
Replies

SMALL BUSSINESS NOT FOUND IP ROUTE

hi everybody i need help my cisco small bussiness SG-500 52P not found command IP ROUTE.

the cause is an electrical cut, my small bussines reset to factory

1 Accepted Solution

Accepted Solutions

Hi Rafael, can you also verify the switch is in switch or router mode? It is possible when lost power, the config was reverted to the last known config (last time the config file was saved).

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

View solution in original post

3 Replies 3

Tom Watts
VIP Alumni
VIP Alumni

Hi Rafael, there's not enough information provided. Do you have multiple IP interface configured on the switch? If so, show ip route should display the default routes especially if there is link state on the vlan interfaces.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

Hi Rafael, can you also verify the switch is in switch or router mode? It is possible when lost power, the config was reverted to the last known config (last time the config file was saved).

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/