Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP Configuration Switch SGE20x0 and SFE2000

Hello,

I'm searching the OID for memory, but I can't find them. I found the mib for SGE20x0 which works also for the switcch SFE2000 here

http://software.cisco.com/download/release.html?mdfid=282414067&softwareid=283415684&release=3.0.0&relind=AVAILABLE&rellifecycle=&reltype=latest , but there is no OID listet for memory. Is there no OID for memory available?

Regards

Jürgen

1 ACCEPTED SOLUTION

Accepted Solutions
Green

SNMP Configuration Switch SGE20x0 and SFE2000

Hi Juergen, the information contained within the link is the documented and supported information.

If the OID / object name is not listed that you desire it is essentially unsupported.

If you haven't already, you can try to walk the database and parse results to see if there's anything close to what you'd like.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
2 REPLIES
Green

SNMP Configuration Switch SGE20x0 and SFE2000

Hi Juergen, the information contained within the link is the documented and supported information.

If the OID / object name is not listed that you desire it is essentially unsupported.

If you haven't already, you can try to walk the database and parse results to see if there's anything close to what you'd like.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
New Member

SNMP Configuration Switch SGE20x0 and SFE2000

Hi Tom. Thanks for your answer. I have included the mib in linux, browsed by snmpwalk and greped by mem, but have nothing found.

Jürgen

232
Views
0
Helpful
2
Replies
CreatePlease to create content