I have a SRW2048 connected back to a Cisco 6509 core switch. For some reason, I cannot establish a gigabit connection with our computers. Both Lenovo laptops and Dell desktops are failing; they always end up falling back and negotiating at 100/full. The port used to uplink back to the 6509 seems to connect at gig, and the port status on both the 2048 and the 6509 indicate that there is a gig connection between them. But any of my computers connected to the 2048 cannot get a gig connection. Can anyone help??
Both the switch and the computer are set to auto-negotiate. When I try to set the computer to a force auto-negotiate 1000 Mbps, it still doesn't work. It keeps trying to connect but never succeeds. The port light will light up with amber (gig) for a couple seconds and then turn off again, and it keeps cycling that way.
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...