Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRW2048 unable to console in

So I decided to purchase a SRW2048 for a switch and now that I have it the previous owner must of had changed up the port and web gui ip since i cannot console in

I use Hyper Terminal with these settings

 

Bits per second : 38400
Data bits: 8 
Parity: None
Stop Bits : 1
Flow control : None
 
And I still get nothing 
Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Right, you bought a null

Right, you bought a null modem cable wich is common, but according to the thread I linked to you will need a straight cable to console into this switch.

-- please remember to rate and mark answered helpful posts --
6 REPLIES

Hi Victor, you probably need

Hi Victor, you probably need to find or make a different cable than you are used to.  See here:

http://community.linksys.com/t5/Switches/Console-cable/m-p/85004?query.id=92299

-- please remember to rate and mark answered helpful posts --
New Member

Right, you bought a null

Right, you bought a null modem cable wich is common, but according to the thread I linked to you will need a straight cable to console into this switch.

-- please remember to rate and mark answered helpful posts --
New Member

Ohhhhh. Okay so Im assuming I

Yes, that look right to me.

Yes, that look right to me.

-- please remember to rate and mark answered helpful posts --
New Member

Thank you very much!!!That

Thank you very much!!!

That did the trick and now when I connect to console I can see everything! :)

Thanks.

 

/RESOLVED

182
Views
10
Helpful
6
Replies
CreatePlease login to create content