04-07-2014 05:29 AM
Hello first of all, hope you have patience with another new guy,
I've had for the last couple of days, trouble with the SRW224G4P switch.
When normaly connected to network (between other switches), it doesn't respond to ping and it doesn't switch packets(computers are unable to receive IP addresses trough DHCP and dont comunicate at all).
When i tested it with directly connected laptop(IP manualy assigned), it responded to ping and i was able to log into the web GUI, but still wasn't able to counicate further.
Haven't had this problem before, don't know what to try as the switch isn't covered by warranty any more.
Help would be apreciated!
Solved! Go to Solution.
04-08-2014 01:56 PM
Hi Bogdan, since it is possible to log in to the GUI, try to factory default reset the switch.
04-08-2014 01:56 PM
Hi Bogdan, since it is possible to log in to the GUI, try to factory default reset the switch.
04-09-2014 11:17 PM
Hello Tom,
tried resetting it to factory defaults but it acts the same. also tried to reinstall firmware although it seems to have the last one but still no success.
04-15-2014 11:12 PM
Run out of solutions so i've tried a second reset to factory defaul wich worked.... thanks Tom.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide