Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

SRW248G4 cisco linksys switch upgrade firmware failed

Dear All

I have cisco Linksys Switch SRW248G4 BOOT software version 1.0.0.06 software version 1.0.0.59 BOOT Software Version 1.0.0.06 Built  23-May-2005  16:58:25

i tried to upgrade firmware to 1.2.3 that is available in cisco site but the firmware file not accepted it show error m,sg while switch boots

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.

Downloading code using XMODEM.
                                            
Download failed

If any one having the firmware file 1.0.0.59 its very much helpful for me

Thanks in advance

karthick

1 REPLY
Silver

Re: SRW248G4 cisco linksys switch upgrade firmware failed

You've tried to reload the firmware using xmodem and that did not work.  If you cannot get the firmware to load regularly or with xmodem, you might have to call into the SBSC at 866-606-1866 and they will be able to troubleshoot with you or possibly set you up with an rma for the device.

1403
Views
0
Helpful
1
Replies
CreatePlease to create content