Hello
I have been fighting against this Lynksys cisco switch to be able to restore admin password, no success. Theorically, is just unplug and plug switch, press ESC and press option 3) Password Recovery Procedure. Then Enter and Enter and switch will boot normaly with admin/blank password, well, not work,.
*******************************************************************
*** Running SW Ver. 1.2.1b Date 31-Aug-2006 Time 13:47:21 ***
*******************************************************************
HW version is 00.03.00
Base Mac address is: 00:1e:e5:1c:fd:eb
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SRW48F4G HW Rev. 0.2
This is the output of part of switch's boot. Finally I get login home but I can't enter, no way. Anybody has any idea? I'm feel depressed T_T
Links
http://es.scribd.com/doc/56455711/11/Figure-2-8-Back-Panel-of-the-SRW248G4
http://www.boiseitoncall.com/diy-tech-tips/71-how-do-i-unlock-a-linksys-switch
http://www.dslreports.com/forum/remark,21280511
http://homecommunity.cisco.com/t5/Switches/How-to-reset-the-Switch/td-p/719/page/2
http://homecommunity.cisco.com/t5/Switches/Console-cable/m-p/85004?query.id=92299#M1038
http://pcsupport.about.com/od/cisco-default-passwords/a/srw2024-default-password.htm
http://homecommunity.cisco.com/t5/Switches/Hard-Reset-SRW2024/td-p/90329
https://supportforums.cisco.com/thread/2135933
http://www.cisco.com/en/US/docs/switches/lan/csbms/srw2048/administration/guide/SRW-US_v10_UG_A-Web.pdf
http://homecommunity.cisco.com/t5/Switches/restoring-factory-defaults-SRW2024/td-p/192643
http://www.opendreams.net/jesse/doc/linksys_srw_switch_password_recovery.txt
Thanks :-/
