Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

There is no "Switchport Voice Vlan" command on SF300-24P !!!

Hello everyone

I am in an urgent problem :S

I have a Small Business SF300-24P

I have created two vlans one data and one voice

but i have not assigned them to the ports and I am not sure how to do so since there's no "switchport voice vlan" command under the interface !!

here are the configurations

btw the switchport mode is still trunk as it is by default

Thanks in advance

switch0a1172#

switch0a1172#

switch0a1172#sho run

config-file-header

switch0a1172

v1.2.9.44 / R750_NIK_1_2_584_002

CLI v1.0

file SSD indicator encrypted

@

ssd-control-start

ssd config

ssd file passphrase control unrestricted

no ssd file integrity control

ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0

!

vlan database

vlan 13,20

exit

voice vlan id 20

voice vlan oui-table add 0001e3 Siemens_AG_phone________

voice vlan oui-table add 00036b Cisco_phone_____________

voice vlan oui-table add 00096e Avaya___________________

voice vlan oui-table add 000fe2 H3C_Aolynk______________

voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone

voice vlan oui-table add 00d01e Pingtel_phone___________

voice vlan oui-table add 00e075 Polycom/Veritel_phone___

voice vlan oui-table add 00e0bb 3Com_phone______________

hostname switch0a1172

username cisco password encrypted c8e383b1dd7be99f878a387d87766e875404e0b3 priv

lege 15

ip telnet server

!

interface vlan 13

name "VLAN13"

!

interface vlan 20

name VOICE

!

switch0a1172#

  • Small Business Switches
1 ACCEPTED SOLUTION

Accepted Solutions
Green

There is no "Switchport Voice Vlan" command on SF300-24P !!!

It does automatically through the auto smart port based off external trigger by default. CDP and LLDP enable devices are supported.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
5 REPLIES
Green

There is no "Switchport Voice Vlan" command on SF300-24P !!!

config t

voice vlan id 20

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
New Member

There is no "Switchport Voice Vlan" command on SF300-24P !!!

it's already there bro

but how to assign data and voice vlan on ports

Green

There is no "Switchport Voice Vlan" command on SF300-24P !!!

It does automatically through the auto smart port based off external trigger by default. CDP and LLDP enable devices are supported.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
New Member

interface vlan 13name "VLAN13

interface vlan 13

name "VLAN13"

!

interface vlan 20

name VOICE

 

Both are vlans, not voice vlans.....

 

Thanks,

Sandy

Hi Sandy,You need

Hi Sandy,

You need:

switchxxxxxx(config)# voice vlan id 20

and smart ports should do the rest.

for your reference: http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/CLI_300.pdf?mdfid=283019666

Regards,

Aleksandra

3742
Views
0
Helpful
5
Replies