Thanks for the input. If deleting the image that is not being used is unsupported, then how does one update the image on these devices? If i can't delete one of the images I don't have enough room to add the newer image.
Seems I'm not able to overwrite that image Tom. Any ideas?
SF300#$ftp://(ipaddressomitted)/Sx300_FW_126.96.36.199.ros flash://image-1 Overwrite file [flash://image-1] ?[Yes/press any key for no]....Cannot delete file image-1:nThe file is in use. SF300#show bootvar Image Filename Version Date Status ----- --------- --------- --------------------- ----------- 1 image-1 188.8.131.52 28-Apr-2010 13:33:55 Not active 2 image-2 184.108.40.206 30-Aug-2011 10:46:34 Active*
"*" designates that the image was selected for the next boot
SF300#show ver SW version 220.127.116.11 ( date 30-Aug-2011 time 10:46:34 ) Boot version 18.104.22.168 ( date 08-Apr-2010 time 16:37:57 ) HW version V01
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...