Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrade of Cisco Catalyst 3750G 24T

Hi, 

I want to upgarde a Cisco Catalyst 3750G 24T because I can't see the web interface.

I checked the documentation and see a lot of videos on the net.

I downloaded the new firmware c3750-ipbasek9-mz.122-55.SE9.bin

I downloaded a tftp software and putted my ip adress on it.

I connected the Cisco by console and launched Putty by serial.

I sended en for grant my right access.

I sended my password

and tapped :

copy tftp: flash:
it asks TFTP Ip, i gave it
10.0.0.45

file name

i gave it 
c3750-ipbasek9-mz.122-55.SE9.bin
 

and after It sended me when it must put it and i sended the same name.
c3750-ipbasek9-mz.122-55.SE9.bin

And then It works few seconds and the cisco says error ... time out.

I've tested with W8, W7 and a lot of tftp server. I disabled my firewall.

The password is the default password. It is a problem ?

Can you help me ?

Thanks

Nicolas

1 REPLY

Did you confirm you can ping

Did you confirm you can ping 10.0.0.45 from your switch to your PC with ftp server?

Also, if your PC has a second network connection (like wireless) you should try to disable it because the ftp server may bind to the wrong interface.

-- please remember to rate and mark answered helpful posts --
22
Views
0
Helpful
1
Replies