Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

What is needed & How to wire switches for stacking

We had a SGE-2010, just purchased 2 (two) SGE-2010P. I want to stack the switches (all 3) (unless there is a better way). Not sure what is needed hardware wise, and how to physically wire the switches. Had switches years ago (diff brand) that used a special cable that connected the switches. It seems that is not the case here. I have not used fiber in networking before so I am new to that part, I’m willing to learn, just need pointed in the right direction.

Details:

The switches will all be in one rack.

Currently we use 100/1000Base-T to all the computers / servers.

Currently 1 switch (2 nd one just died) is connected to the SGE-2010 (LAG over two ports)

Currently 5 servers are connected to the SGE-2010 (LAG over two ports each).

A bunch of individual computers where thrown onto the SGE-2010 when the other switch died.

All the servers and computers are on 1 big happy LAN, all the computers need to access all the servers. No need to separate things.

Side Note:

Will be moving to new building in about a year. MIGHT have VOIP, so I might need to add another switch or two.

Questions:

Can all three switches be stacked, (1) SGE-2010 & (2) SGE-2010P?

I THINK I need to use the GBIC port 4 to stack, I understand 1 port is enough if two switches are used, but what about three or more switches.

What are the other GBIC ports used for?

Will I be better off (can I ) use the GBIC ports LAG (2 ports) to the other switches? Or would regular ports work just as well?

Thanks for you help

Everyone's tags (4)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Gold

What is needed & How to wire switches for stacking

Hi Ric,

Thank you for posting. Please see the following diagram that demonstrates how to stack 3 switches:

Gold

What is needed & How to wire switches for stacking

Ric,

Using the regular ports should give the same performance. As far as I know you can stack the SGE2010P with the SGE2010 without issue.

6 REPLIES
Silver

What is needed & How to wire switches for stacking

Ric,

Look over the admin guide and repost further questions:

http://www.cisco.com/en/US/docs/switches/lan/csbms/sfe2000/administration/guide/SFE-SGE2xxx_Admin_Guide.pdf

Page 20

Jasbryan

New Member

What is needed & How to wire switches for stacking

Jasbryan, thanks for the link. I have read most of Chapter 2 in the Administration guide before I posted here. I re-read page 20 (also page 19&21 just in case). I must be brain dead I don't see anywhere on page #20, or the rest of the chapter, pertaining to my questions.

Gold

What is needed & How to wire switches for stacking

Hi Ric,

Thank you for posting. Please see the following diagram that demonstrates how to stack 3 switches:

New Member

What is needed & How to wire switches for stacking

Mpyhala, thanks for the diagram. I take it that I do NOT have to use the GBIC ports? Glanced back over the Admin Guide, did not see where it said I HAD to use the GBIC ports, but I have it in my head that I do have to use them to stack for some reason.

Will using the regular ports 24 & 48 give the same performance as using GBIC port 3 & 4?

Have not heard anyone complain about mixing SGE2010 & SGE2010P in one stack so I’m going to say it is OK. Personally I do not see why not, other than watching where I plug in an item that needs power.

Gold

What is needed & How to wire switches for stacking

Ric,

Using the regular ports should give the same performance. As far as I know you can stack the SGE2010P with the SGE2010 without issue.

Silver

What is needed & How to wire switches for stacking

Ric,

Usually customer use the mini-gbic modules for switches that have distance of 300' + between each other.

The end copper ports are shared with two mini-gbic ports that also can be used with the stack mode.

Jasbryan

2154
Views
0
Helpful
6
Replies
CreatePlease to create content