Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco FindIT Network Manager Device Support List

Objective

The Cisco FindIT Network Management provides tools that help you easily monitor, manage, and configure your Cisco 100 to 500 Series network devices such as switches, routers, and wireless access points (WAPs) using your web browser. It also notifies you about device and Cisco Support notifications such as the availability of new firmware, device status, network settings updates, and any connected devices that are no longer under warranty or covered by a support contract.

The FindIT Network Management is a distributed application which is comprised of two separate components or interfaces: one or more Probes referred to as FindIT Network Probe and a single Manager called FindIT Network Manager.

An instance of FindIT Network Probe installed at each site in the network performs network discovery, and communicates directly with each Cisco device. In a single site network, you may choose to run a standalone instance of FindIT Network Probe. However, if your network comprises multiple sites, you may install FindIT Network Manager at a convenient location and associate each Probe with the Manager. From the Manager interface, you can get a high-level view of the status of all the sites in your network, and connect to the Probe installed at a particular site when you wish to view a detailed information for that site.

This article provides the list of products that make up the Cisco 100 to 500 Series portfolio that support the FindIT Network Manager. The features supported are primarily controlled by the management protocols supported by the device, and so may be dependent on the device firmware version.

The FindIT Network Manager functionality is divided into the following areas:
  • Discovery — Includes the ability to detect the devices in the network and display detailed information about each device.
  • Monitoring — Perform real time monitoring of the devices through the Dashboard.
  • Operations — Perform firmware upgrade, configuration (save, backup, restore), device reboot.
  • Configuration — Includes functionality offered by the Device View, System Configuration and Network pages.
  • Reporting — Device is included in network reports.

FindIT Network Manager Device Support List

Routers

Model

Discovery

Monitoring

Operations

Configurations

Reporting

RV110W

Yes

Yes

No

No

Yes

RV130/RV130W

Yes

Yes

No

No

Yes

RV132W/RV134W

Yes

No

No

No

Yes

RV180/RV180W

Yes

Yes

No

No

Yes

RV215W

Yes

Yes

No

No

Yes

RV320/RV325

Yes

Yes

No

No

Yes

Switches

Model

Discovery

Monitoring

Operations

Configurations

Reporting

90/100/110 Series Unmanaged

No

No

No

No

No

SG200-08/SG200-08P

Yes

No

No

No

Yes

200 Series Smart

Yes

Yes

Yes

Yes

Yes

220 Series Smart Plus

Yes

Yes

No

No

Yes

250 Series Smart

Yes

Yes

Yes

Yes

Yes

350 Series Managed

Yes

Yes

No

Yes

Yes

500 Series Stackable

Yes

Yes

Yes

Yes

Yes

550 Series Stackable

Yes

Yes

Yes

Yes

Yes

Wireless Access Points

Model

Discovery

Monitoring

Operations

Configurations

Reporting

WAP121

Yes

Yes

No

No

Yes

WAP131

Yes

Yes

No

No

Yes

WAP150

Yes

Yes

No

No

Yes

WAP321

Yes

Yes

No

No

Yes

WAP351

Yes

Yes

No

No

Yes

WAP361

Yes

Yes

No

No

Yes

WAP371

Yes

Yes

Yes *

Yes *

Yes

WAP551/WAP561

Yes

Yes

No

No

Yes

WAP571/WAP571E

Yes

Yes

No

No

Yes

* Firmware Version: 1.3.0.x

Note: Check this article regularly for updates.

Version history
Revision #:
1 of 1
Last update:
‎03-09-2017 08:41 PM