Access Points connection drop approximately 30 times with 802.1x Radius
As you can see from the top this is my problem that could not solve for 2 weeks. To summarize again, I used to my access points with standart configuration, I mean vlans, dhcp and other basic configration. After we increased security of our access points we started to encouter connection drops issue.
These are the example logs;
Interface Dot11Radio0, Deauthenticating Station xxxx.xxxx.xxxx (my mac address) Reason: Previous authentication no longer valid
Also a lot of:
interface Dot11Radio0, Deauthenticating Station xxxx.xxxx.xxxx (my mac address) Reason: Sending station has left the BSS
as well as we have a lot of authentication failures such like:
%DOT11-7-AUTH_FAILED: Station xxxx.xxxx.xxxx (my mac address) Authentication failed
With the latest release of firmware for the WAP 561, 551, 371, 351 a new
feature was added that would allow customers to upgrade the firmware for
their clustered access points from the main access point.The basic steps
to accomplish this is:1) Download th...
Special thanks to Alex McDonald for sharing his favorite tip:My favorite
tip is the ‘write default’ command on autonomous wireless access points,
it simplifies manual conversion of a WAP with a static ip address to a
LAP with a DHCP address.This saved a l...