Access via SSH on Cisco WAP 4410N only works via the web GUI?
Hello, my name is Anderson, I am expert networks.
I wonder if the version of Cisco AP 4410N WAP SSH works, because since I bought the equipment funciou never the same, the user is not the same as the web access and I saw no default setting for this in the cisco site.
It has some important information about this topic, it is necessary to reset the table mac and other resources that are not possible via WEB GUI.
Hello, myname isAnderson, I amexpertnetworks.
I wonder ifthe version ofCiscoAP4410NWAPSSHworks, because sinceI boughtthe equipmentfunciouneverthe same,the user is notthe same as theweb accessand I saw nodefault settingfor thisintheciscosite. It hassome important information aboutthis topic,it isnecessary toresetthe tablemacand other resourcesthat are not possibleviaWEBGUI.
Configure Client QoS MAC Class Map on the WAP125 or WAP581
The Quality of Service (QoS) feature on the WAP125 or WAP581 access points contain Differentiated Services (DiffServ) support that allows you to classify and man...
Configure Packet Capture on a WAP125 or WAP581 Access Point
The Packet Capture feature enables capturing and storing packets received and transmitted by the Wireless Access Point (WAP). The captured packets can then be anal...
Configuring WPA-PSK Complexity on the WAP131, WAP351, and WAP371
When a VAP (Virtual Access Point) is configured, there are several options available for securely authenticating clients. If WPA Personal is selected (also kn...