A customer of mine bought an external antenna for WAP200G, HGA9N. This has obviously a N-connector, WAP200 does not. Is there a conversion availble for N connector? And is this antenna useable for the WAP200?
The WAP200 uses an SMA type of antenna while as you state the HGA9N antenna is an "N" type. You may be able to procure an adapter through a 3rd Party company like "L-Com" or others, however we cannot guarantee your sucess or performance in this type of configuration. I would recommend you acquire an SMA type of antenna instead. These would also be available through a 3rd Party.
Article ID:5727 Configure the Single Point Setup on the WAP581 Objective
A Wireless Access Point (WAP) connects to a router and serves as a node
to the Wireless Local Area Network (WLAN). Clustering is when multiple
WAPs are joined on the same network. Th...
Article ID:5706 Upgrade the Firmware on the WAP125 Objective New
firmware releases are improvements from previous firmware versions.
Network device performance can be enhanced when an upgrade is made.
Firmware files can be downloaded through: Trivial File...
Article ID:1972 Configure Time Settings on a Wireless Access Point
Objective The system clock provides a network-synchronized time-stamping
service for software events such as message logs. Without synchronized
time, accurate correlation of log files betw...