I have been experiencing an extremely odd issue with a couple of my AP541Ns, I configure the APs to use 5Ghz Wireless-N and then set the channel to 100 and leave it, I then come back and access the APs an hour or so later and the APs are now using a different random channel each. I have tried flashing them with the latest firmware and restoring the factory settings however so far that has not helped. I am currently running all five of the APs in 2.4Ghz Wireless-N mode and have so far not had any issues with the channel changing, it has remained constant at 1 for the past several hours. I must also mention that I am using all of the APs in WDS. I would appreciate any help.
Article ID:5727 Configure the Single Point Setup on the WAP581 Objective
A Wireless Access Point (WAP) connects to a router and serves as a node
to the Wireless Local Area Network (WLAN). Clustering is when multiple
WAPs are joined on the same network. Th...
Article ID:5706 Upgrade the Firmware on the WAP125 Objective New
firmware releases are improvements from previous firmware versions.
Network device performance can be enhanced when an upgrade is made.
Firmware files can be downloaded through: Trivial File...
Article ID:1972 Configure Time Settings on a Wireless Access Point
Objective The system clock provides a network-synchronized time-stamping
service for software events such as message logs. Without synchronized
time, accurate correlation of log files betw...