Hi, I am trying to connect the AP541N to a Windows 2008 R2 RADIUS server for authentication. I've already configured the Windows RADIUS server (made certificate, installed and configured NPS) and now I am trying to connect and configure the AP541N to use the Windows RADIUS server to authenticate my computer clients, but nothing happens when I configure the RADIUS IP and the Shared Key? Is there maybe a problem with the generated certificate? Or do I have more restrictions with the Shared Key than the 63 characters max?
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...