Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 4410N Issues

Hey guys,

I'm having a couple of issues with the 4410N. We are currently using the 4410N's as access points for our Blackberrys to use UMA.

I currently have 4410N connected, I can connect WiFi through my blackberry and the UMA works. Now, I try to ping my gateway through the blackberry, it pings 2 times and timesout 2 times. Then the UMA just stops working, I have to power cycle the unit.

If I replace the 4410N with a 4400N, everything works, ping works fine.

Latest firmware is on both units, the configuration is the exact same and the 4410N is giving me nothing but headaches. I would buy 4400Ns instead but they are discontinued and my vendor isn't sellign them anymore so I either need to get the 4410N working or find another company to get my project rolling.

Any ideas?

5 REPLIES
New Member

Re: Cisco 4410N Issues

What version of firmware do you have on the Cisco WAP4410N?

2.0.0.5 or 1.0.12

Silver

Re: Cisco 4410N Issues

How about changing the wireless channel on the device and seeing if the wireless stabilizes.

New Member

Re: Cisco 4410N Issues

Firmware is 2.0.0.5

I tried 4 different wireless channels, 1, 6, 8, 11 and all the same issues. In the end, I'm waiting for an RMA from my vendor so I can return these and pick up the Aironet 1142 which would suit my needs a bit better.

New Member

Re: Cisco 4410N Issues

We are having similar issues with the 4410N. I was initially very impressed with these units and am now quite disappointed. Link goes in and out randomly, ping times are all over the place, etc. If anybody has any solutions for any of this, I would be very interested in them. I have tried setting them to all kinds of different channels, including auto, setting them to N-only, using no encryption, using encryption, etc. I have four of them in service and they're all doing it.

New Member

Re: Cisco 4410N Issues

Refer to this Discussion string

https://supportforums.cisco.com/message/3078740

4667
Views
0
Helpful
5
Replies
CreatePlease login to create content