Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco RV110W Setup Guest VLan

I have a RV110W setup as a wireless router right now. There is only 1 wireless network, the private office network. I would like to setup a guest network on its own VLan for internet only access. How do I go about this?

 

Here is my current setup.

Vlan 1 192.168.1.0 / 24
       Firewall with internet: 192.168.1.1
       DHCP Server: 192.168.1.5

 

I have a managed switch that has defined all the ports to VLan 1.

The RV110W is setup like the following.
       I have port 1 going to the router (not the Wan port, port #1).
       I have given the port a static Ip address and disabled DHCP on the device.
       I have a wireless network defined for VLan 1 and all the ports have untagged traffic going to VLan 1.

 

What do I have to do to set this up correctly?  

Everyone's tags (4)
1429
Views
0
Helpful
0
Replies
CreatePlease to create content