Cisco wap321 not responding

[martin4102]

We have one WAP321 which stopping responding after being online for 24hrs. Currently we are just rebooting the device to get it up and running. However I would like to find a permanent fix.

[Aleksandra Dargiel]

Hi Martin,

Please check if you management VLAN for LAN interface is untagged. keeping this untagged should help.

Regards,

Aleksandra

[mohabdel]

Hi Martin,

Please do some changes in your AP and monitor unit 24 hours. Access unit GUI and do this following

go to Wireless --> Radio

in redio change

Channel to 1, 6, or 11

change Beacon Interval to 400

change DTIM Period to 4

Lefact Rate Sets:  uncheck 1 up and down, uncheck 2 up and down

click SAVE

monitor unit 24 hours

Thanks,

Moh