Hi Michiel, thank you for using our forum, my name is Luis I am part of the Small business Support community. If you are trying to connect your WAP561 with WAP321 through WDS, following the admin guide it is not possible due WDS only works with Cisco WAP121 and Cisco WAP321 devices, this is one of few guidelines you are able to find in the admin guide, please check this info in the link below, page 90.
Yeah well, why cant they make 321 and 561 work together through single point setup? We have 4 of the 321's and wanted to put 2 extra WIFI points in our building and thought it would be best to do that with the 561, but if they dont co-op like that I guess we have to go for more 321's.
With the latest release of firmware for the WAP 561, 551, 371, 351 a new
feature was added that would allow customers to upgrade the firmware for
their clustered access points from the main access point.The basic steps
to accomplish this is:1) Download th...
Special thanks to Alex McDonald for sharing his favorite tip:My favorite
tip is the ‘write default’ command on autonomous wireless access points,
it simplifies manual conversion of a WAP with a static ip address to a
LAP with a DHCP address.This saved a l...