The Data Sheet on the Cisco AP 541N Wireless Access Point (features and benefits) says it includes an easy-to-follow graphical user interface to guide you through the setup of a guest network. This highly secure guest access solution lets visitors get online without granting them any visibility into your business network and without impeding the performance of your business applications. I have logged in directly via a web browser to the ap541n and did not find options for setting up a guest network. Also tried using Cisco Configuration Assistant ver 2.2, and reviewed the admin guide as well to no preval. Any clarity, assistance greatly appreciated. Starting to look like this functionality is a misstatement.
I'm running into the same issue. I've been able to setup everything else without issue, however, there is no refrence to the network isolation that is advertised. I just want to have a guest SSID that clients can connect to without having to worry about them also having access to server ip's. This is functionality that has been advertised.
Highly secure guest access: In a world where technology touches
virtually every aspect of business operations, vendors and customers
often need to access the Internet when visiting your business location.
The Cisco AP 541N includes an easy-to-follow graphical user interface
(GUI) to guide you through the setup of a guest network. This highly
secure guest access solution lets visitors get online without granting
them any visibility into your business network and without impeding the
performance of your business applications. The solution even lets you
provide a welcome screen to greet visitors using your guest network (it
could be a welcome screen or company policy).
it works in conjunction with VLANs. If the other parts of your network (switches, router) already have a guest VLAn setup, you add a virtual WiFi network (Virtual Access Point, a second SSID) and link this WiFi network to the VLAN. The linking of the SSI with the VLAN is being doen in the GUI of the AP541N
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...