i am having problems changing the cisco WAP321 for the very first time.
The manual says the default user and password, and ok, it Works. but inmediately, it makes me change the password for the fisrt time, i changed it, and automatically it make me logout. Whan i try to login with the new password, it does not let me login. I reseted the Access P. and the surprise is that i can not login in with the default user and password. I can no Access in no way to the Access P.
I'm sorry you are experiencing this issue. I have seeing this before and it is browser related. You can follow skelzer01 recommendation and switch to chrome, or you can enable compatibility view in IE 11, this will fix the issue most of the time.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...