Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Lightweight access point configuration

Hi, I am in the process of configuring my first lightweight AP521. Does the ap itself have an IP address? I figured it would, but I am having a hard time finding / configuring it. CCA has very little configuration options for it.

I am thinking, that's kind of the point; that it's lightweight and I should have to mess with that stuff?

And if that's the case, how do I configure SNMP? Do I only configure it on the WLC?

Thanks,

Ben

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Lightweight access point configuration

Ben,

Please follow the document https://supportforums.cisco.com/docs/DOC-9327

This has a step by step configuration example of the AP521. One note I have seen a few AP521 with username/password = Cisco where the C is capitol.

To answer you question The AP does have an IP and using CCA1.9 it is easy to see the address in the topology view. As for the configuration follow the link it has a few pages on how to configure the 521.


Let me know if you need more information,

Douglas Smith


douglsmi@cisco.com

2 REPLIES
New Member

Re: Lightweight access point configuration

Ben,

Please follow the document https://supportforums.cisco.com/docs/DOC-9327

This has a step by step configuration example of the AP521. One note I have seen a few AP521 with username/password = Cisco where the C is capitol.

To answer you question The AP does have an IP and using CCA1.9 it is easy to see the address in the topology view. As for the configuration follow the link it has a few pages on how to configure the 521.


Let me know if you need more information,

Douglas Smith


douglsmi@cisco.com

New Member

Re: Lightweight access point configuration

Thanks alot

2354
Views
0
Helpful
2
Replies