Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Linksys IP phone SPA922 / Bridge WBP54G v2

Hi  Guys,

We are trying to connect a Linksys IP phone SPA922 / Bridge WBP54G v2 to a WPA 2 ssid.( Aruba)

We  are getting IP address and connected to wifi but no traffic SIP is seen  on our network. All the settings seem ok. Phone is connected to the  bridge, gets an IP address but does not registers on SIP network

Could you help?

Regards

B

1 REPLY
New Member

Re: Linksys IP phone SPA922 / Bridge WBP54G v2

Any help on this?

Sent from Cisco Technical Support iPhone App

911
Views
0
Helpful
1
Replies
CreatePlease to create content