Mixing WAP321 & WAP121 Devices on Single Point Setup?
Using Single Point Setup with a mix of the WAP321 and WAP121 is not supported with the current firmware. It is possible that it will work depending on the configuration and it may be added as a feature in a future firmware.
With the latest release of firmware for the WAP 561, 551, 371, 351 a new
feature was added that would allow customers to upgrade the firmware for
their clustered access points from the main access point.The basic steps
to accomplish this is:1) Download th...
Special thanks to Alex McDonald for sharing his favorite tip:My favorite
tip is the ‘write default’ command on autonomous wireless access points,
it simplifies manual conversion of a WAP with a static ip address to a
LAP with a DHCP address.This saved a l...