Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mounting Brackets for WLC526

I ordered a WLC526 for a customer. Howevever, it didn't come with brackets to mount it into a standard 19" rack.

I called our distributer support. They said that it's intended to be a desktop unit. However, it has screw holes on the side of it.

Does anyone have a part number for brackets to mount the WLC526 into the rack?

Thanks,

Ben

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Mounting Brackets for WLC526

The 526 controller doesnt have its own brackets, but the controller housing is the same as the UC500 housing, so you can order the brackets for the UC500.

ASA5505-RACK-MNT     for Rack

ASA5505 -WALL- MNT   for Wall

Mike

2 REPLIES
Cisco Employee

Re: Mounting Brackets for WLC526

The 526 controller doesnt have its own brackets, but the controller housing is the same as the UC500 housing, so you can order the brackets for the UC500.

ASA5505-RACK-MNT     for Rack

ASA5505 -WALL- MNT   for Wall

Mike

New Member

Re: Mounting Brackets for WLC526

Thanks alot.

Those part numbers are actually for the asa, but i hear they will work on the WLC526. The actual part number for the UC500 rack mounts is ACS-UC500RM-19=.

I found that the "UC500" part number quite a bit less expensive than the ASA part number.

Thanks,

Ben

1796
Views
0
Helpful
2
Replies